# 🗃️ JVC

- [HA-SR85S Ésnsy + DIY pleather pads + earside foam layer](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-38.md): Almost identical FR graph as Sony MDR-V900, but bassier
- [HA-SR85S Ésnsy + DIY pleather pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-38/untitled-37.md): Without foam, upper mids get a bit out of hand
- [HA-D700 + MDR Z1000 pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/jvc-ha-d700-+mdr-z1000-pads.md): Original pads were too degraded to make a measurement. These aftermarket pads sound the best with this headphone.
- [HA-D810 + Aftermarket SRH840 pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-36.md): Old pads unavailable. After market SRH840 pads are most similar.
- [HA-D990 + Aftermarket SHR840 pads and new earside foam](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-35.md)
- [HA-D1000](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-34.md)
- [HA-DX3](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-dx3.md): Every family has that one strange relative.
- [HA-DX3 - Driver 'magnet' damping removed](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-dx3/ha-dx3-driver-magnet-damping-removed.md): Finally actually listenable
- [HA-DX1000](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-33.md): Measured with brand new genuine ear pads
- [HA-M1000 + Aftermarket SRH-840 Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-31.md)
- [HA-MR77X](https://itsgreq.gitbook.io/headphone-measurements/jvc/jvc-ha-mr77x.md)
- [HA-MX10-B + Aftermarket MDR-Z1000 Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-mx10-b-+-aftermarket-mdr-z1000-pads.md): Basically an improved MDR-CD900ST
- [HA-MX100-Z](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-29.md)
- [JVC HA-MX100-Z + Edifier W820BT Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-29/jvc-ha-mx100-z-+-edifier-w820bt-pads.md): This is the one
- [JVC HA-MX100-Z + MDR-Z1000 Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-29/untitled-30.md)
- [JVC HA-MX100-Z - Z1000 Pad/Grey VS. W820BT Pad/Green](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-29/jvc-ha-mx100-z-z1000-pad-grey-vs.-w820bt-pad-green.md)
- [HA-RX700 (one side faulty)](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-28.md)
- [HA-RX700 + Peerless HPD-50N25PR00-32 Paper dome driver](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-28/untitled-27.md): Too warm
- [HA-S770-W](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-26.md): Low-end, bass-heavy. Somewhat tasteful but quite bloated.
- [HA-S770-W (copy 2)](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-26/ha-s770-w-copy-2.md)
- [HA-S770-W (copy 2) Modified](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-26/ha-s770-w-copy-2-modified.md): Added damping to bring down all bass by about 5dB
- [HA-SD7](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sd7.md): Null value at 4.2KHz is audible this time, not a miniDSP EARS artefact
- [HA-SW01](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01.md)
- [HA-SW01 + Brainwavs Angled Pleather pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/ha-sw01-+-brainwavs-angled-pleather-pads.md): High-end bass head sound.
- [JVC HA-SW01 + Brainwavz Hybrid aftermarket pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/jvc-ha-sw01-+-brainwavz-hybrid-aftermarket-pads.md): Cheap aftermarket clone pads
- [JVC HA-SW01  + Leather MDR-V6/MDR-CD990ST Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/jvc-ha-sw01-+-leather-mdr-v6-mdr-cd990st-pads.md): These pads are VERY close to stock signature, but better.
- [JVC HA-SW01 + SRH840 pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/jvc-ha-sw01-+-srh840-pads.md): Aftermarket Shure SRH840 pads
- [JVC HA-SW01 + Wewom pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/jvc-ha-sw01-+-wewom-pads.md)
- [JVC HA-SW01 + ebay SW02 Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/jvc-ha-sw01-+-ebay-sw02-pads.md): Appears to be the same or almost same pad as YDYBZB pad
- [JVC HA-SW01 + YAXI stPad2-LR](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/jvc-ha-sw01-+-yaxi-stpad2-lr.md)
- [JVC HA-SW01 + YDYBZB pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sw01/jvc-ha-sw01-+-ydybzb-pads.md): Elevates bass slightly while preserving treble
- [HA-SZ2000 + generic aftermarket pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sz2000-+-generic-aftermarket-pads.md): The worst headphone. But the best and only real sub-woofer quality bass.
- [HA-SZ2000 - Z Series vs. Live Beat + Leather VB630 Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sz2000-+-generic-aftermarket-pads/ha-sz2000-z-series-vs.-live-beat-+-leather-vb630-pads.md): Red = Z series / Blue = Live Beat = They're basically the same so don't worry.
- [HA-SZ2000 + generic aftermarket pads + EQ Profile](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sz2000-+-generic-aftermarket-pads/ha-sz2000-+-generic-aftermarket-pads-+-eq-profile.md): My current EQ settings using Equalizer APO and PeaceUI
- [HA-SZ2000 + Aftermarket Leather HD630VB Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sz2000-+-generic-aftermarket-pads/ha-sz2000-+-aftermarket-leather-hd630vb-pads.md)
- [HA-SZ2000 + Aftermarket Leather HD630VB Pads + EQ](https://itsgreq.gitbook.io/headphone-measurements/jvc/ha-sz2000-+-generic-aftermarket-pads/ha-sz2000-+-aftermarket-leather-hd630vb-pads-+-eq.md)
- [HP-660](https://itsgreq.gitbook.io/headphone-measurements/jvc/hp-660.md)
- [Victor HP-D900 + Aftermarket RS195 Pleather Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/victor-hp-d900-+-aftermarket-rs195-pleather-pads.md)
- [Victor HP-D900 + Aftermarket RS195 Leather Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/victor-hp-d900-+-aftermarket-rs195-pleather-pads/victor-hp-d900-+-aftermarket-rs195-leather-pads.md): Deeper than pleather pads. More V-shaped.
- [Victor HP-D900 + Aftermarket SRH840 Pads](https://itsgreq.gitbook.io/headphone-measurements/jvc/victor-hp-d900-+-aftermarket-rs195-pleather-pads/jvc-victor-hp-d900-+-srh840-pads.md)
- [HP-1000](https://itsgreq.gitbook.io/headphone-measurements/jvc/hp-1000.md)
- [HP-1100](https://itsgreq.gitbook.io/headphone-measurements/jvc/hp-1100.md)
- [HP-D90](https://itsgreq.gitbook.io/headphone-measurements/jvc/hp-d90.md)
- [STH10-E](https://itsgreq.gitbook.io/headphone-measurements/jvc/untitled-25.md): Paper-cone vintage


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://itsgreq.gitbook.io/headphone-measurements/jvc.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.